Economy LCD Resin Yellow is FormFutura entry level 3D printing resin. This resin is ideal for beginners and prints with a very limited smell. It combines accuracy with short curing times and a nice matte surface finish. Resin printing doesn’t have to be more expensive than 3D printing with filament!

Important key features

• Easy to use general purpose LCD resin.
• Excellent printability properties & limited smell.
• Matte surface finish with fine detail.
• Good compatibility with all DLP and LCD / MSLA 3D printers in the range of 385 – 420nm.

Suitable applications

• 3D printing figurines, miniatures and models.
• 3D printing functional prototypes.
• 3D printing end-use products.

Physical properties after post curing

This data provided for those properties are typical values, and should not be construed as sales specifications.

Specimen printed in ZXY Orientation (ISO 52921) and examined according to ISO 17296-3.

• Shake the bottle for at least 2 minutes before each use.
• After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
• The resin can be poured back from the vat into the bottle once your print is finished
• Always use protective measurements like safety glasses and nitrile gloves when handling resins.

Post-processing

• We do advise you to post-process your 3D print in order to achieve the material properties
• Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
• An ultrasonic cleaner is preferred/recommended
• Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
• Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
• Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
• The preferred curing wavelength is between 300-410nm

Safety Data Sheet